Transition joints due to the body to be able to apply to the use of all kinds of industrial enterprise needs, so it is also a common joint, and as an important part of the transition, must not be careless when installation, otherwise it is easy to cause leaks, some special industries and even prone to accidents, so we should be clear transition joint body what are the steps when installation, Next, I will introduce the installation steps of the transition joint body in detail:

1. Check before installation

Before the installation of the transition joint body, all parts should be checked to see whether there is a shortage of parts and whether there is damage to parts, and whether there is a wrong mouth phenomenon when connecting.

Two, parts splicing

Assemble and splicing all the parts that can be assembled into one to lay a good foundation for the final assembly. In the process, the connection should be compact as far as possible to avoid leakage.

Three, bolt fixation

All the assembled parts shall be fixed with bolts and nuts to ensure the firmness of the fixed parts, but not too tight, which may cause damage to the parts.

Four, adjust the position

Install the final assembled transition joint and adjust the final position to ensure that it can work properly.

Five, test performance

Finally, the performance of the transition joint body should be tested, and the work test should be conducted to detect whether there will be leakage and whether the installation is loose, so as to ensure that there will be no safety problems.

Through the above introduction, I believe that we have a final understanding of the installation steps of the transition joint body. As an important transition point of the machine, the significance of the transition joint can be imagined. Therefore, it is necessary to focus on the observation of the installation, and the steps are not wrong, so as to avoid serious safety problems.